100kW DAM All-Solid-State AM Broadcasting Transmitter
Model No: 100KW DAM All-solid-state AM This type technological advance, reasonable prices, and fine performance price compared to, redundant reliability, high
100kW DAM All-Solid-State AM Broadcasting Transmitter
Detailed Product Description
This type technological advance, reasonable prices, and fine performance price compared to, redundant reliability, high efficiency, is ideal choice which the user renewal, high quality broadcast. This type uses the digital AM technology is extremely mature, in recent years in the domestic high power WM transmitter transformed has used this technology, the routine maintenance facilitated extremely quickly, once appeared fault to be able to restore promptly broadcast, its maintenance cost extremely was low, the use merit put manages IRFP360 only then several dozens Yuan prices. And its control section is concise, convenient, and clear.
The control section uses the digitization logic circuit, double color photo tube compose 28 test points, the aircraft may dispose liquid crystal display microcomputer control unit, not only can complete all controls, demonstration, alarm function, but can direct the computer connection, constitutes the microcomputer supervisory system. This aircraft over voltage, the overflow, over temperature, the antenna unbalance as well as other essential spot condition wrong have protection. Or reduce power use, or switches off the transmitter, may broadcast safely.
The transmitter has frequency source input port which the wave synchronization actuator provides effective value 1V, with this aircraft crystal oscillator frequency source automatic cut over, the frequency source which the synchronized actuator provides primarily use.
Descriptions and Specifications:
Transmitter Type: MW 100percent Solid State
Frequency Range: 531kHz∼1602kHz, specified by customer
Carrier Wave Frequency Stability: ≤1Hz/day
Power Output: ≥10∼115KW three preset power voltage level available with parallel operation capability
Output Impedance: 150ω, 50ω or specified by customer
Output Port Type: 4inch flange Cable Connection
RF Harmonic and Miscellaneous Emission: better than related regulations of FCC and CCIR Standard
Transmitter Type: Bring bilateral AM A3E
Modulator Type: DAM Digital Amplitude Modulation
Carrier Wave Fall: ≤1percent 1KHz m≈1
Audio Frequency Response: ≤1dB 30Hz∼10000Hz
Audio Frequency Distortion: ≤1% m≈0.90 30∼10000Hz
Square Overshoot: ≤1% 40Hz m≈0.8
Square tilt: ≤3percent 40Hz m≈0.8
SNR: ≥65dB
AM Degree Of Asymmetry: ≤0.5%t ≈100% ≈1KHz
Positive Peak Modulation Capability: 135% of positive peak at 100KW
Audio Input Voltage: minus10dBm∼plus10dBm
Audio Input Impedance: balanced 600ω, 150ω, 50ω elects
Input Power: AC 3 phase 4 wire 380V±10percent 50Hz±2Hz
Power Factor: 0.98
Overall Efficiency: ≥85%
Remote Control Port: available
Operating Temperature: -10 ∼ +55oC
The upper limit should be 2oC lower for each 300m increase of altitude, provided the altitude is more than 2000m
Operating Humidity: ≤90%, no condensing
Continuous working hours: More than 24 hours
Cooling Mode: Forced Air Cooling
Whole Machine Dimensions: 3964(W) x 1030(D) x 2060(H)mm
Weight: 3000kg
| Model No.: |
100KW DAM All-solid-state AM |
| Product Origin: |
China |